Okidata C710N, C710DN, and C710DTN LED Heads Cleaning Instructions

Users must be aware that sometimes an unclean print such as blurry images or white lines on a document doesn’t necessary means that the toner cartridge or any part of the printer is defected. In fact, dirty LED heads can also led to unsatisfactory print jobs.

It only takes a few minutes to clean the LED head, which can assist the user to determine the cause of dirty prints, sometimes even help in preventing the hassle of spending time and money for unnecessary replacements and returns. Here are a few simple steps on how to clean the Okidata C710N, C710DN, and C710DTN series printer LED heads:

1. Turn off the printer

2. Open the top cover

3. Wipe the LED heads gently with a soft tissue; do not apply any cleaning sprays or any sort, which might damage the lens surface

4. Close the top cover and turn on the printer to resume printing

Dusts and other particles can build up inside printer overtime and it is often a good idea to regularly clean the LED heads to for printer maintenance even before a bad print ever shows up.

We hope you find the information to be helpful and we would like to invite you to save more money on printing expenses with the coupon code SAVE10 for 10% off of your entire purchase at www.toner-spot.com. Below are our premium quality remanufactured Okidata C710 series toner cartridges at a already low price:

Okidata C710(43866104) Compatible Toner Cartridge – Black 

Our price: $64.99 - Save another 10% off with coupon code SAVE10

Okidata C710(43866103) Compatible Toner Cartridge – Cyan 

Our price: $64.99 - Save another 10% off with coupon code SAVE10

Okidata C710(43866101) Compatible Toner Cartridge – Yellow 

Our price: $64.99 - Save another 10% off with coupon code SAVE10

Okidata C710(43866102) Compatible Toner Cartridge – Magenta  

Our price: $64.99 - Save another 10% off with coupon code SAVE10

Okidata C710Compatible Toner Cartridges Full Color Set – Black, Cyan, Yellow, Magenta

Our price: $259.99 - Save another 10% off with coupon code SAVE10. Free shipping also included!

Please contact us at sales@toner-spot.com if you have any questions or would like to receive customized price quote for bulk orders or institutional accounts.

HP 2600 and 2605 Series Print Quality Troubleshoot

Sometime after you installed a new cartridge, you immediately notice that the color print quality come out under your expectations. The first reaction, understandably, is to suspect that the new toner cartridge that you have just replaced is defective. However, that is not always the case and the problem might be easily resolved with a few push of the button or reinstallation. This is often a much faster solution than waiting to return and replace the cartridge that might not have an issue to begin with. Below, we will discuss some common causes of print quality issue and also resolutions that might solve the problem.

Sealing Tape

One of the most common causes of print color inconsistency is caused by the protective sealing tape that was not removed prior to installation.

Solution: Verify that the sealing tape has been completely removed from the print cartridge and reinstall the cartridge.

Calibration

Toner cartridges sometimes are misaligned upon installation. Color inconsistency can also be caused by toner seating position, calibrating the cartridges will usually fix this issue.

Solution: Calibrate the toner cartridges with the instructions below

1. To calibrate from the printer, press (Left arrow) or (Right arrow) until the display reads System setup.

2. Press (Select).

3. Press (Left arrow) or (Right arrow) until the display reads Print quality.

4. Press (Select).

5. Press (Left arrow) or (Right arrow) until the display reads Calibrate color.

6. Press (Select).

7. Press (Left arrow) or (Right arrow) until the display reads Calibrate now.

8. Press (Select).

9. Press (Select) to confirm Calibrate now.

Toner Build Up

During the printing process, paper, toner and dust particles can accumulate inside the printer. Over time, this buildup can cause print-quality problems such as toner specks or smearing. This printer has a cleaning mode that can correct and prevent these types of problems.

Solution: Cleaning the printer and remove toner build-up

1. Open the front door. Locate the blue cleaning tool that is situated to the left above the black print cartridge.

3. Move the cleaning tool back and forth across the cartridge five times.

4. Ensure that the cleaning tool is returned to the left when the cleaning is finished.

5. Close the front door.

6. Run a cleaning page.

Above are some basic and simple solutions that might quickly resolve the print quality issue that you are currently encountering. These of course are not the only issues that might have caused print quality inconsistency. A more advanced post discussing color fading problem due to engine design will be posted in the future for HP Color LaserJet 2600, 1600, and 2605 series.

We understand our customers want reliable prints, less hassle, and significant savings. That’s why here at Toner Spot, all of our website orders come with 30 Day Money Back Satisfaction Guarantee and up to 1 year product warranty. In addition, our technicians and customer service support teams always respond quickly to our customers. Lastly, all of our products are processed under ISO-9001 Standards and all batches are tested according to STMC testing guidelines for final printing results. That’s why many users tried our products and have become regular customers ever since!

Please follow the link to find our high quality HP Q6000 series compatible toner cartridges: 

Save more with our current coupon code SAVE10 for 10% off entire purchase at www.toner-spot.com.