The Xerox Phaser 4510 printer can handle a wide variety of
media types including transparencies, envelopes, index cards, labels, and some
of the custom size paper. On top of regular A4 size paper, envelopes are also
one of the most commonly used media in office environments.
Envelopes can be printed from all Xerox Phaser 4510 printer trays.
However, users must make sure only use envelopes made for laser printers. Otherwise
print quality issues such as smear,
uneven prints, and unclear texts and graphics might occur.
Printing envelopes from Tray 1:
1. Pull Tray 1 completely out from the printer
2. Insert envelopes size #10 commercial, C5, or B5 in the
tray flap side down. Adjust paper guides to fit the envelopes. Make sure the
top of the envelopes line against the left side of the printer. Load no more
than 10 envelopes at a time
For Monarch and DL envelopes, please them in the tray flap
side down with the top of the envelopes entering first
3. Insert the tray back to the slot and push completely back into the printer
4. Access Control Panel, make sure “Envelope” is indicated
and the size is correct, press “OK.”
If you need to change the setting, select “Change Setup”
then press “OK,”
Select “Envelope” then press “OK,”
Select the correct setting then press “OK.”
5. Check on the printer driver, make sure select “Envelope”
and “Tray 1” before printing
Printing envelopes from Tray 2-4:
1. Pull the desired Tray completely out from the printer
2. Insert envelopes size #10 commercial, C5, or B5 in the
tray flap side down. Adjust paper guides to fit the envelopes. Make sure the
top of the envelopes line against the left side of the printer. Load no more
than 75 envelopes at a time
Again, for Monarch and DL envelopes, please them in the tray
flap side down with the top of the envelopes entering first
3. Insert the tray back to the slot and push completely back
into the printer
4. Access Control Panel and select “Paper Tray Setup” then press “OK,” select
designated tray number then press “OK.”
Make sure the size is correct and the paper type is set as
“Envelope.”
If need to change the setting, select “Change Setup” then
press “OK,”
Select “Envelope” then press “OK,”
Select the correct setting then press “OK.”
5. Check on the printer driver, make sure select “Envelope”
and the correct tray number before printing
Toner Spot offers two re-manufactured toner models for the
Xerox Phaser 4510 printer. The two models are the regular toner cartridge and
special MICR version. Remember to enter current 10% off coupon code SAVE10 to receive 10% off entire
purchase.
These two toner models also qualify for free standard
shipping to 50 contiguous U.S. states.
Toner Spot
re-manufactured Xerox Phaser 4510 (113R00712) Toner Cartridge $94.99
Toner Spot
re-manufactured Xerox Phaser 4510 (113R00712) MICR Toner Cartridge $149.99
*Special magnetic ink character recognition toner cartridge
usually used for check printing.