Tuesday, July 19, 2016

Brother DR720 Reset Instructions


Do not panic when the printer does not recognize a newly installed DR720 drum cartridge. The drum unit might be in perfectly working condition and all you will need to do is to tell your printer that you have replaced a new drum. Here is the step-by-step instruction on how to manually reset the printer to accept the drum unit:

1. Keep the printer power on and open the front cover. Leave the cover open during the process
2. Press the “Clear” button
3. Press “1” to confirm that you’re installing a new drum unit
4. Close the front cover when the LCD displays “Accepted”
5. Turn the printer off and wait for couple minutes
6. Turn the printer on again and the machine should clear the recognition error and ready to use

If operating from a touch screen printer:

1. Press “Stop/Exit” to interrupt the error message
2. Press “Menu”
3. Press “Up” or “Down” arrow key to display Machine Info
4. Press “Machine Info”
5. Press “Reset Menu”
6. Press “Drum”
7. Press “Yes” when the machine displays “Reset Drum?” then press “Stop/Exit” again to complete the resetting process

These steps are pretty straightforward and easy to operate. If the above steps failed to work, check with your drum suppliers and see if the cartridge is defective and needs to be exchanged.

For further inquiries, please email us at sales@toner-spot.com and our customer service team will respond within 24 business hours, and we are usually much faster than that.

Do not forget to use our current 10% off coupon code HT2016 and also receives free standard shipping within contiguous U.S. states when the order exceeds $75.



http://www.toner-spot.com/Brother-DR720-Premium-Compatible-Drum-Unit-p/br-dr720.htm


This drum unit can last up to 30,000 page yield at 5% coverage and is compatible with the following printer models:

DCP-8110DN
DCP-8150DN
DCP-8155DN
DCP-8250DN
HL-5450DN
HL-5470DW
HL-5470DWT
HL-6180DW
HL-6180DWT
MFC-8510DN
MFC-8710DW
MFC-8910DW
MFC-8950DW
MFC-8950DWT

No comments:

Post a Comment